Differences

This shows you the differences between two versions of the page.

--- wifi-2614-16 [2023/02/15 17:35] – jim
+++ wifi-2614-16 [2023/02/16 16:44] – jim
@@ Line 1: / Line 1: @@
-=====Connecting to WiFi (GRP2614, 2615, 2616)=====
+=====Connecting to WiFi - GRP2614, GRP2615, GRP2616=====
-**To connect the these models to a Wi-Fi Network, please follow the steps below:**\\
+**To connect the these models to a WiFi Network, please follow the steps below:**\\
-. From the Home Screen, press the Round button between the 4 arrow buttons, and navigate to **System → Wi-Fi settings**.
+. From the Home Screen, press the Round button between the 4 arrow buttons, and navigate to **System → WiFi settings**.
-{{ :fig_81_wifi_feature.png?nolink&250 |Fig. 81: WiFi Feature}}
+{{ :fig_81_wifi_feature.png?nolink&600 |Fig. 81: WiFi Feature}}\\
-. Set Wi-Fi to **Enabled** and press **Save** button.
+. Set WiFi to **Enabled** and press **Save** button.
-{{ :fig_82_enable_wifi.png?nolink&250 |Fig. 82: Enabling Wifi}}
+{{ :fig_82_enable_wifi.png?nolink&600 |Fig. 82: Enabling Wifi}}\\
-Figure 82: Enable Wi-Fi\\
-. Select “Scan”.
+. Select **Scan**.
-The device will automatically start scanning for Wi-Fi access points within the range
+The device will automatically start scanning for WiFi access points within range.
-GRP261X/GRP2624/GRP2634 User Guide
+{{ :fig_83_wifi_scanning.png?nolink&600 |Fig 83: WiFi Scanning}}\\
-    Version 1.0.5.93
-Page | 97
+. A list of available WiFi networks will be displayed. Select the desired network.
-  Figure 83: Wi-Fi Scanning
+{{ :fig_84_nearby_wifi_networks.png?nolink&600 |Fig 84: Nearby WiFi networks}}\\
-. A list of available Wi-Fi networks will be displayed. Select the desired network,
-Figure 84: Nearby Wi-Fi networks
+. If required, enter the WiFi network password to connect.
-. If required, enter the password to connect.
+{{ :fig_85_wifi_password_required.png?nolink&600 |Fig 85: WiFi password required}}\\
-Figure 85: Wi-Fi password required
-. An incorrect password will trigger an error message “Cannot connect to the selected network”.
+. An incorrect password will trigger the error message **Cannot connect to the selected network**.
-GRP261X/GRP2624/GRP2634 User Guide
+ - If the connection is successful a “WiFi Network Connected” message will display on screen
-   Version 1.0.5.93
+{{ :fig_86_failed_vs_successful_wifi_connection.png?nolink&500 |Fig 86: Failed/Successful WiFi Connection}}\\
-Page | 98
+. Check the WiFi icon on the Home Screen to verify if the WiFi network is properly connected.
+{{ :fig_87_wifi_status.png?nolink&500 |Fig 87: WiFi Status}}\\
+. A new section **Current Connection** will show under **System → WiFi settings**.
+{{ :fig_88_current_connection.png?nolink&250 |Fig 88 : Current Connection}}\\
+. Selecting **Scan**, users may choose to **Forget** the current connection and establish a new one.
- - If the connection is successful a “Wi-Fi NetWork Connected” message will display on screen
-  Figure 86: Failed/Successful Wi-Fi connection
-. Check the Wi-Fi icon on idle screen to verify if the Wi-Fi network is properly connected
-Figure 87: Wi-Fi Status
-. A new section “Current Connection” will show under System → Wi-Fi settings.
-Figure 88 : Current connection
-. Selecting “Scan”, Users may choose to “Forget” the current connection and establish a new one.