Differences

This shows you the differences between two versions of the page.

--- wifi-2614-16 [2023/02/15 17:35] – jim
+++ wifi-2614-16 [2023/02/15 17:39] – jim
@@ Line 6: / Line 6: @@
 . Set Wi-Fi to **Enabled** and press **Save** button.
 {{ :fig_82_enable_wifi.png?nolink&250 |Fig. 82: Enabling Wifi}}
-Figure 82: Enable Wi-Fi\\
-. Select “Scan”.
+. Select **Scan**.
-The device will automatically start scanning for Wi-Fi access points within the range
+The device will automatically start scanning for Wi-Fi access points within range.
-GRP261X/GRP2624/GRP2634 User Guide
+{{:fig_83_wifi_scanning.png?nolink&250 |Fig 83: Wi-Fi Scanning}}
-    Version 1.0.5.93
-Page | 97
+. A list of available Wi-Fi networks will be displayed. Select the desired network.
-  Figure 83: Wi-Fi Scanning
+{{:fig_84_nearby_wifi_networks.png?nolink&250 |Fig 84: Nearby Wi-Fi networks}}
-. A list of available Wi-Fi networks will be displayed. Select the desired network,
-Figure 84: Nearby Wi-Fi networks
+. If required, enter the WiFi network password to connect.
-. If required, enter the password to connect.
+{{:fig_85_wifi_password_required.png?nolink&250 |Fig 85: WiFi password required}}
-Figure 85: Wi-Fi password required
 . An incorrect password will trigger an error message “Cannot connect to the selected network”.
 GRP261X/GRP2624/GRP2634 User Guide