Differences

This shows you the differences between two versions of the page.

--- wifi-2614-16 [2023/02/15 18:02] – jim
+++ wifi-2614-16 [2023/02/16 16:44] – jim
@@ Line 1: / Line 1: @@
-=====Connecting to WiFi - GRP2614, GRP2615, GRP2616)=====
+=====Connecting to WiFi - GRP2614, GRP2615, GRP2616=====
 **To connect the these models to a WiFi Network, please follow the steps below:**\\
 . From the Home Screen, press the Round button between the 4 arrow buttons, and navigate to **System → WiFi settings**.
-{{ :fig_81_wifi_feature.png?nolink&250 |Fig. 81: WiFi Feature}}\\
+{{ :fig_81_wifi_feature.png?nolink&600 |Fig. 81: WiFi Feature}}\\
 . Set WiFi to **Enabled** and press **Save** button.
-{{ :fig_82_enable_wifi.png?nolink&250 |Fig. 82: Enabling Wifi}}\\
+{{ :fig_82_enable_wifi.png?nolink&600 |Fig. 82: Enabling Wifi}}\\
 . Select **Scan**.
 The device will automatically start scanning for WiFi access points within range.
-{{ :fig_83_wifi_scanning.png?nolink&250 |Fig 83: WiFi Scanning}}\\
+{{ :fig_83_wifi_scanning.png?nolink&600 |Fig 83: WiFi Scanning}}\\
 . A list of available WiFi networks will be displayed. Select the desired network.
-{{ :fig_84_nearby_wifi_networks.png?nolink&250 |Fig 84: Nearby WiFi networks}}\\
+{{ :fig_84_nearby_wifi_networks.png?nolink&600 |Fig 84: Nearby WiFi networks}}\\
 . If required, enter the WiFi network password to connect.
-{{ :fig_85_wifi_password_required.png?nolink&250 |Fig 85: WiFi password required}}\\
+{{ :fig_85_wifi_password_required.png?nolink&600 |Fig 85: WiFi password required}}\\
 . An incorrect password will trigger the error message **Cannot connect to the selected network**.