Differences

This shows you the differences between two versions of the page.

--- relay [2022/02/03 13:40] – mike
+++ relay [2022/06/17 16:51] (current) – jim
@@ Line 2: / Line 2: @@
 {{ ::sainsmart-4.jpg?200|}}
-Supported on Hello Hub V1, V2 and Microservers.
+Supported on Hello Hub V1, V2, and Microservers.
 You can control the physical world with a Hello Hub and **ring-u** phone system! Need to open a door, turn on lights, or a siren? Maybe ring a bell or open a gate? In July 2020, the geeks at **ring-u** added support for the popular Sainsmart and compatible 4 and 8 channel/relay modules. Similar **FT245RL** chip controlled units via USB should also work. These are usually also available on [[https://www.amazon.com/s?k=sainsmart+relay+usb|Amazon.com searching for SainSmart relay usb]] , the links below have better specs and wiring information. If you aren't sure about a board compatibility, contact us at 423-456-6700.
@@ Line 14: / Line 14: @@
 ==== Caveats ====
-  * **ring-u** will need to add the apropos driver to your Hello Hub for it to work properly. Contact support at ring-u.com prior to installation.
+  * **ring-u** will need to add the appropriate driver to your Hello Hub for it to work properly. Contact support at ring-u.com prior to installation.
-  * The customer will require some expertise to interface these to your desired application. We can offer advice, but you may need to hire an expert with some skills and ancillary parts ring-u does not supply.
+  * The customer will require someone with expertise to interface these to your desired application. We can offer advice, but you may need to hire an expert with some skills and ancillary parts ring-u does not supply.
   * The customer should use the ancillary power inputs, so the relays do not cycle on Hello Hub power up or reset, which it will do if only using the USB power via the on-board jumper.
-  * If used for door striker locks, or gate controls, you should also have deadbolts or other mechanisms in place to be used as apropos when you don't want the phone system to control the relays.
+  * If used for door striker locks, or gate controls, you should also have deadbolts or other mechanisms in place to be used as a manual backup or when you don't want the phone system to control the relays.
-  * **ring-u** is not liable for the usage of these features, many variables beyond our control.
+  * **ring-u** is not liable for the usage of these features due to the many variables beyond our control.
 ==== Example usage ====