support wiki

helpful humans at 423-456-6700

User Tools

Site Tools


manual-config:algo-8180

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
manual-config:algo-8180 [2022/01/24 22:04] mikemanual-config:algo-8180 [2023/02/03 16:22] (current) mike
Line 1: Line 1:
 {{ :manual-config:8180-side-view_crop.jpg?direct&200|}} {{ :manual-config:8180-side-view_crop.jpg?direct&200|}}
-====== ALGO 8180 Manual Config Example ======+====== ALGO 8180 G2 Configuration Example ======
  
 Algo 8180 G2 is a good example of a manually configured SIP device useful as a loud ringer or external paging device (loud speaker).  Algo 8180 G2 is a good example of a manually configured SIP device useful as a loud ringer or external paging device (loud speaker). 
-Create a manual configured extension for use as a ringer, and as a paging extension. This is 2 extensions per Algo 8180 G2 IF you want both "ringer only" and "PA"There is a configuration screen on the ALGO for both accounts. + 
 +  - Create a manual configured extension for use as a ringer, and as a paging extension. Two different extensions and uses.  
 +  - Access the Algo's web interface using HTTPS and the device IP address Find the IP address on your DHCP server and/or follow the Algo instructions.  
 +  - Use the IP address of the Hello Hub as your SIP Server for both accounts.  
 +  - Use the extension # as the login ID, and copy the password from the Hello Hub Extension Page.  
 +  - Click 'Save' and test from other phones.  
 + 
 + 
  
 ====ring-u portal screen example==== ====ring-u portal screen example====
-{{:manual-config:manualsipexample-algo.png?direct&400|}} +{{:manual-config:manualphoneconfig-algo.png?direct&400|}}
  
-====ALGO 8180 G2 config screen example====+====Matching ALGO 8180 G2 config screen example====
 {{:manual-config:algo-8180-g2-exampe-config.png?direct&400|}} {{:manual-config:algo-8180-g2-exampe-config.png?direct&400|}}
 +
 +
 +====If a Hosted Hello Hub====
 +
 +Advanced Settings tab:
 +
 +   * Register/Subscribe Period(seconds): 120
 +   * KeepAlive Method: Double CRLF
 +   * KeepAlive Period(seconds): 10
 +   * Server Redundancy: Disabled
 +
 +This is overly aggressive, but should keep your firewall from timing out on these sessions. Our Hosted Hello Hub's have a long default timeout (hours), but good firewalls track UDP connections and drop them pretty quickly. We typically set automatically configured deskphones to 120 to 300 seconds for the same reason. 
 +
 +
 +
 + 
manual-config/algo-8180.1643061850.txt.gz · Last modified: 2022/01/24 22:04 by mike

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki