Differences

This shows you the differences between two versions of the page.

--- hello-hub-v1 [2022/12/05 17:47] – [Status Lights] jim
+++ hello-hub-v1 [2023/03/17 14:06] (current) – [Status Lights] jim
@@ Line 8: / Line 8: @@
 From left to right when facing the ring-u logo:\\
-(sp)(sp)The **1st Light** turns **red** to indicate power is on.\\
+**1st Light** turns **red** to indicate power is on.\\
-(sp)(sp)The **2nd Light** blinks **yellow** to indicate network communication.\\
+**2nd Light** blinks **yellow** to indicate network communication.\\
-(sp)(sp)The **3rd Light** is the main status light.\\
+**3rd Light** is the main status light.\\
-(sp)(sp)(sp)It blinks **blue** when making attempts to contact the ring-u servers,\\
+(sp)(sp)It blinks **blue** when making attempts to contact the ring-u servers,\\
-(sp)(sp)(sp)is solid **green** when it has a successful connection with ring-u,\\
+(sp)(sp)is solid **green** when it has a successful connection with ring-u,\\
-(sp)(sp)(sp)and occasionally blinks **purple** to indicate that the battery monitoring service is working.\\
+(sp)(sp)and occasionally blinks **purple** to indicate that the battery monitoring service is working.\\
 \\
 The **3rd Light** can //also// indicate system errors.\\
 (sp)(sp)**Alternating Red and Yellow** indicates that the Hello Hub has encountered an internal software error and needs to be powered off and on again.\\
-An **occasional red flash** indicates that the Hello Hub failed to retrieve an update from the ring-u servers. It will try again automatically.\\
+(sp)(sp)An **occasional red flash** indicates that the Hello Hub failed to retrieve an update from the ring-u servers. It will try again automatically.\\
+(sp)(sp)**Cycling Colors (blue, green, red)** indicates hub stuck in a boot loop. Hub cannot be contacted or helped (it's a goner).\\
 (sp)(sp)**Solid Red** indicates the Hello Hub can not get past the firewall.  A firewall reboot usually clears this error.