Differences

This shows you the differences between two versions of the page.

--- getting-started-2614-16 [2023/02/16 15:31] – created jim
+++ getting-started-2614-16 [2023/02/16 16:46] (current) – jim
@@ Line 14: / Line 14: @@
 |  1  | GPL License   |
-{{:equipment_package_contents.png?nolink&650 |GRP2614, GRP2615, GRP2616 Package Contents}}
+{{:equipment_package_contents.png?nolink&675 |GRP2614, GRP2615, GRP2616 Package Contents}}
 \\
 \\
@@ Line 40: / Line 40: @@
   - Pull out the tab from the handset cradle (See figure below).
   - Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below).
-{{:wall_mount_.png?nolink&650 |Wall Mount Instructions}}
+{{:wall_mount_.png?nolink&675 |Wall Mount Instructions}}
+\\
+====Connecting the GRP261X====
+To setup the GRP261X, follow the steps below:
+  - Connect the handset and main phone case with the phone cord.
+  - Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable.
+  - Connect the PSU output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE switch is used in step 2, this step could be skipped.
+  - The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up.
+  - Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP.
+{{:connecting_the_grp261x.png?nolink&675 |}}