support wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{ :manual-config:8180-side-view_crop.jpg?direct&200|}}
====== ALGO 8180 G2 Configuration Example ======

Algo 8180 G2 is a good example of a manually configured SIP device useful as a loud ringer or external paging device (loud speaker). 

  - Create a manual configured extension for use as a ringer, and as a paging extension. Two different extensions and uses. 
  - Access the Algo's web interface using HTTPS and the device IP address.  Find the IP address on your DHCP server and/or follow the Algo instructions. 
  - Use the IP address of the Hello Hub as your SIP Server for both accounts. 
  - Use the extension # as the login ID, and copy the password from the Hello Hub Extension Page. 
  - Click 'Save' and test from other phones. 




====ring-u portal screen example====
{{:manual-config:manualphoneconfig-algo.png?direct&400|}}

====Matching ALGO 8180 G2 config screen example====
{{:manual-config:algo-8180-g2-exampe-config.png?direct&400|}}


====If a Hosted Hello Hub====

Advanced Settings tab:

   * Register/Subscribe Period(seconds): 120
   * KeepAlive Method: Double CRLF
   * KeepAlive Period(seconds): 10
   * Server Redundancy: Disabled

This is overly aggressive, but should keep your firewall from timing out on these sessions. Our Hosted Hello Hub's have a long default timeout (hours), but good firewalls track UDP connections and drop them pretty quickly. We typically set automatically configured deskphones to 120 to 300 seconds for the same reason.