support wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Unpacking and Connecting=====

This page provides basic setup/installation instructions, including the list of the packaging contents, and also information for obtaining the best performance from your GRP261X series phone.

====Equipment Packaging====
^  Qty  ^ Item  ^
|  1  | Phone Main Case   |
|  1  | Handset   |
|  1  | Phone Stand   |
|  1  | Ethernet Cable   |
|  1  | Power Adapter   |
|  1  | Phone Cord   |
|  1  | Quick Installation Guide   |
|  1  | GPL License   |

{{:equipment_package_contents.png?nolink&675 |GRP2614, GRP2615, GRP2616 Package Contents}}
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
====Using the Phone Stand====
To install the phone on the table with the phone stand, attach the phone stand to the bottom of the phone through the phone stand slot. (Upper half, bottom part).

====Using the Slots for Wall Mounting====
  - Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
  - Attach the phone to the wall via the wall mount hole.
  - Pull out the tab from the handset cradle (See figure below).
  - Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below).
{{:wall_mount_.png?nolink&675 |Wall Mount Instructions}}
\\

====Connecting the GRP261X====
To setup the GRP261X, follow the steps below: 
  - Connect the handset and main phone case with the phone cord.
  - Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable.
  - Connect the PSU output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE switch is used in step 2, this step could be skipped.
  - The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up.
  - Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP.

{{:connecting_the_grp261x.png?nolink&675 |}}