Differences

This shows you the differences between two versions of the page.

--- phonelineemulation [2022/04/05 20:25] – mike
+++ phonelineemulation [2025/11/02 18:49] (current) – external edit 127.0.0.1
@@ Line 21: / Line 21: @@
 And now, step by step:
-{{ ::manualconfigexample.png?200|}}
+{{ ::manualconfigexample.png?300|}}
   - Configure your system using the Hello Hub and automatic configuration, verify operation.
   - Configure each phone number (My Services->Numbers->Edit) with a SHORT label. It shows up on incoming calls Caller ID's.
   - Create a manual extension (Configuration->Extensions->Add an Extension) for each phone and line you want. In the example, "Bob" is extension 123 for the main Acme Insurance Company line, and is 323 for the Acme Roofing Company. You can choose any numbering scheme, this is just an example.
+  - Choose the Caller ID for these manual extensions under the advanced tab as desired.
   - For each number, you will want to configure schedules and routing to receptionist or group of phones.
-  - For each phone, login to it's IP address with a web browser,
+  - For each phone, login to it's IP address with a web browser. For example if Bob's phone is 192.168.77.150, pointing your web browser to it like: [[https://192.168.77.150]] and login with the phones login and password. If a GRP2614 or similar, the password may be on a sticker on the bottom of the phone, or in the customer portal under the autoconfigured extensions advanced tab. If you assign a new password to the phone, make a note of it and please add it to the customer portal under the autoconfigured extensions advanced tab. For example, if you change Bob's phone password to "chaosmonkey99", put that password on extension 123 so the system still manages that phone.  {{ ::grp2614-account2.png?300|}}
+  - On each phone, configure Account 2, Account 3, etc.. with the manually configured extension information, using the IP address of the Hello Hub for the SIP Server and Outbound Proxy. Use the password created for each extension. In the example, 323 for the SIP Authentication ID and the password from above as 8BFC9KT3iu76K6P in the Sip Authentication Password is the most crucial setting.
+  - Test. Each phone should now show multiple lines on the upper left. Pressing the line/account and then dialing should call out with the caller ID that the extension defaults to.