Differences

This shows you the differences between two versions of the page.

--- firewall-network-config [2022/11/17 17:00] – [Specialized Firewalls] jim
+++ firewall-network-config [2026/10/28 15:38] (current) – [Specialized Firewalls] jim
@@ Line 19: / Line 19: @@
 |192.76.120.66|UDP,TCP|5060-5080,3478,5349|Upstream Provider SIP/STUN&TURN|
 |52.112.66.139|UDP,TCP|5060-5080|Upstream Provider SIP|
-|2603:1037:0:c::f|UDP,TCP|5060-5080|Upstream Provider SIP|
+|2603:1037:0:c::f|UDP,TCP|5060-65535|Upstream Provider SIP|
+|103.115.247.0/24|UDP/TCP|5060-65535|Upstream Provider SIP/Media|
 If you are using certain advanced configurations for remote extensions/phones you may need to add. Ask if you need this one, it is not common.
@@ Line 33: / Line 34: @@
 =====Specialized Firewalls=====
-For higher end firewalls, please observe manufacturers' best practices.\\
+For higher end firewalls you will need to VLAN your VOIP phones and appliances. This is due to the enhanced security they provide that also has a tendency to block or interfere with voice traffic. If you have an advanced/specialized firewall it is unlikely we will be able to help you solve phone system issues if you have not already put the entire phone system on its own private VLAN.
-**Untangle** [[https://support.untangle.com/hc/en-us/articles/202671703-VoIP-Deployment-Models-and-Troubleshooting-Guide|settings]]\\
+**tl:dr -** if you don't follow your firewall manufacturer's VOIP guidelines, your ring-u system will not work and we will not be able to help you much.
+Please observe manufacturers' best practices from the links provided below.\\
+**Untangle** [[https://support.edge.arista.com/hc/en-us/articles/202671703-VoIP-Deployment-Models-and-Troubleshooting-Guide|settings]]\\
 **SonicWall** [[https://www.sonicwall.com/support/knowledge-base/how-to-configure-voip-to-use-any-voip-phone-system-best-practices/210615132522720/|settings]]\\
-**Cisco Meraki** [[https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/VoIP_on_Cisco_Meraki%3A_F.A.Q._and_Troubleshooting_Tips|settings]]
+**Cisco Meraki** [[https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/VoIP_on_Cisco_Meraki%3A_F.A.Q._and_Troubleshooting_Tips|vlan settings]] and [[https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Block_Listing_and_Allow_Listing_Clients|allow list settings]]\\
+**ubiquiti UDM Pro** [[ubiquiti-advanced|Ubiquiti UDM Pro]] or **EdgeRouter** [[ubiquiti-erx-configs|Ubiquiti ER X Configs]]\\
+**pfSense** [[https://docs.netgate.com/pfsense/en/latest/recipes/nat-voip-phones.html|settings 1]] and [[https://docs.netgate.com/pfsense/en/latest/recipes/nat-voip-pbx.html|settings 2]] \\
+**watchguard** [[https://techsearch.watchguard.com/KB?type=Article&SFDCID=kA10H000000g3doSAA&lang=en_US| settings]]\\
+**FortiNet** [[https://docs.fortinet.com/document/fortigate/7.6.0/administration-guide/858887/voip-solutions]]
 ===== Need more? =====
 **ring-u** was founded by some very technical folks, please contact tech support if you need specific help with your network configuration.