Differences

This shows you the differences between two versions of the page.

--- extensions-adding [2022/06/10 16:21] – jim
+++ extensions-adding [2022/06/16 13:03] (current) – [Adding Extensions Later] jim
@@ Line 3: / Line 3: @@
 //(Do NOT skip this part just because you think you don't need to read a preface.  You do.)//**\\
 So you plugged in all your phones and the Hello Hub before starting the [[setup_wizard|Setup Wizard]], right?\\
-Here's where all that effort and instruction following will pay off.\\
+Here's where all that effort and instruction following will pay off.\\ \\
 Go to **Configuration > Extensions**\\
-Press the **Add an Extension** button and choose **Auto Config** and click **Create**.\\
+Press the **Add an Extension** button, choose **Auto Config**, and click **Create**.\\
 Wait.\\
 Refresh your screen every minute or so.\\
@@ Line 16: / Line 16: @@
 Again, be patient.  Especially for larger systems, but true also for small ones, there is a LOT going on under the hoods of your phones and in your Hello Hub.  the Hub is directing the configuration of your phones and there is a lot to that process.\\
 Resist the urge to tinker.\\
-Tinkering breaks process.\\
+Tinkering breaks processes.\\
 \\
 //If you really think something is wrong and you need to do SOMETHING, contact us by phone or through Support.//\\
 Usually, we can get your phones Added as Extensions and in use in under 15 minutes. Sometimes it may take a bit longer though, and that is okay.\\
-**If it takes much longer than that, though, give us a call.**\\
+//**If it takes much longer than that, though, give us a call.**\\ //
 \\
@@ Line 30: / Line 30: @@
 -----------------------------------------------------
 ====Adding Extensions Later====
-If you need to add phones later on, it's easier than the first time, especially if you purchased your phones from ring-u.\\
+If you need to add phones later on, simply return to the **Extensions** page, click **Add an Extension**, then select the type of extension you will add:\\
-Simply return to the Extensions page and click **Add an Extension**, then select the type of extension you will add:\\
+(sp)(sp)**1. Auto Config** for supported phones\\
-(sp)(sp)1. **Auto Config** for supported phones\\
+(sp)(sp)**2. Virtual** creates an extension that forwards to another phone number, often used for mobile phones.\\
-(sp)(sp)2. **Virtual** creates an extension that forwards to another phone number, often used for mobile phones.\\
+(sp)(sp)**3. Grandstream Wave** creates a softphone extension for Grandstream Wave that creates a scannable QRCode for autoconfiguration\\
-(sp)(sp)3. **Grandstream Wave** creates a softphone extension for Grandstream Wave that creates a scannable QRCode for autoconfiguration\\
+(sp)(sp)**4. Zoiper** creates a softphone extension for Zoiper that creates a scannable QRCode for autoconfiguration.\\
-(sp)(sp)4. **Zoiper** creates a softphone extension for Zoiper that creates a scannable QRCode for autoconfiguration.\\
+(sp)(sp)**5. Manual** creates an extension that can be configured using a web browser or other means.\\
-(sp)(sp)5. **Manual** creates an extension that can be configured using a web browser or other means.\\
+(sp)(sp)**6. VoiceMail** creates an extension that is only used for VoiceMail which can be retrieved from any phone, and is also transcribed and emailed with the recording.\\
-(sp)(sp)6. **VoiceMail** creates an extension that is only used for VoiceMail which can be retrieved from any phone, and is also transcribed and emailed with the recording.\\