Differences

This shows you the differences between two versions of the page.

--- wifi-2614-16 [2023/02/15 17:25] – created jim
+++ wifi-2614-16 [2023/02/15 17:40] – jim
@@ Line 2: / Line 2: @@
 **To connect the these models to a Wi-Fi Network, please follow the steps below:**\\
 . From the Home Screen, press the Round button between the 4 arrow buttons, and navigate to **System → Wi-Fi settings**.
-{{ :fig_81_wifi_feature.png?nolink&250 |}}
+{{ :fig_81_wifi_feature.png?nolink&250 |Fig. 81: WiFi Feature}}\\
-Figure 81: Wi-Fi feature
-. Set Wi-Fi to “Enabled” and press “Save” button.
+. Set Wi-Fi to **Enabled** and press **Save** button.
+{{ :fig_82_enable_wifi.png?nolink&250 |Fig. 82: Enabling Wifi}}\\
+. Select **Scan**.
+The device will automatically start scanning for Wi-Fi access points within range.
+{{ :fig_83_wifi_scanning.png?nolink&250 |Fig 83: Wi-Fi Scanning}}\\
+. A list of available Wi-Fi networks will be displayed. Select the desired network.
+{{ :fig_84_nearby_wifi_networks.png?nolink&250 |Fig 84: Nearby Wi-Fi networks}}\\
+. If required, enter the WiFi network password to connect.
+{{ :fig_85_wifi_password_required.png?nolink&250 |Fig 85: WiFi password required}}\\
-Figure 82: Enable Wi-Fi
-. Select “Scan”.
-The device will automatically start scanning for Wi-Fi access points within the range
-GRP261X/GRP2624/GRP2634 User Guide
-    Version 1.0.5.93
-Page | 97
-  Figure 83: Wi-Fi Scanning
-. A list of available Wi-Fi networks will be displayed. Select the desired network,
-Figure 84: Nearby Wi-Fi networks
-. If required, enter the password to connect.
-Figure 85: Wi-Fi password required
 . An incorrect password will trigger an error message “Cannot connect to the selected network”.
 GRP261X/GRP2624/GRP2634 User Guide