Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
reliability [2019/07/09 01:00]
admin [Good Power Matters]
reliability [2019/07/09 01:02] (current)
admin [Good Power Matters]
Line 8: Line 8:
  
 Best way to reboot or power cycle a Hello Hub: Best way to reboot or power cycle a Hello Hub:
-   Turn off via the power switch on the back.  +   Turn off via the power switch on the back.   ​ 
-   Unplug the power cable.  +   Unplug the power cable.  
-   Make sure the lights are out.  +   Make sure the lights are off.  
-   Turn the Hello Hub on (with it unplugged). You should see lights on the front. This tests the battery. +   Turn the Hello Hub on (with it unplugged). ​ 
-   Plug the power cable in. +   ​- ​You should see lights on the front. This indicates ​the battery ​is good.  
 +   Plug the power cable in.  
 +   - In 2-3 minutes you should have a working system
  
 ==== Reserve an IP Address ==== ==== Reserve an IP Address ====