Differences

This shows you the differences between two versions of the page.

--- ubiquiti-advanced [2026/02/19 20:26] – mike
+++ ubiquiti-advanced [2026/02/19 20:45] (current) – jim
@@ Line 1: / Line 1: @@
 ===== Ubiquiti UDM Pro=====
-Advanced Settings for Dream Machine Pro aka UDP Pro
+Advanced Settings for Dream Machine Pro (UDM Pro).
-Search for SIP or Timeout. Adjust as below. Make sure there is **NOT SIP** enabled under NAT "helpers"
+Search for SIP or Timeout. Adjust as below.
-Also set the timeout to a number greater that 600 seconds. 620 is recommended as the phones use 600.
+Under **Firewall Connection Tracking** (bottom of below image), make sure that **SIP** is not enabled. If there is a gray box showing SIP, that means it is enabled and you must click the **X** to dismiss/disable it.
+**Timeout** should be set to a number greater that 600 seconds. 620 is recommended as our phones use 600.