=====Connecting to WiFi - GRP2614, GRP2615, GRP2616=====
**To connect the these models to a WiFi Network, please follow the steps below:**\\
1. From the Home Screen, press the Round button between the 4 arrow buttons, and navigate to **System → WiFi settings**.
{{ :fig_81_wifi_feature.png?nolink&400 |Fig. 81: WiFi Feature}}\\ 

2. Set WiFi to **Enabled** and press **Save** button.
{{ :fig_82_enable_wifi.png?nolink&400 |Fig. 82: Enabling Wifi}}\\

3. Select **Scan**.
The device will automatically start scanning for WiFi access points within range.
{{ :fig_83_wifi_scanning.png?nolink&400 |Fig 83: WiFi Scanning}}\\

4. A list of available WiFi networks will be displayed. Select the desired network.
{{ :fig_84_nearby_wifi_networks.png?nolink&400 |Fig 84: Nearby WiFi networks}}\\

5. If required, enter the WiFi network password to connect.
{{ :fig_85_wifi_password_required.png?nolink&400 |Fig 85: WiFi password required}}\\

6. An incorrect password will trigger the error message **Cannot connect to the selected network**.
 - If the connection is successful a “WiFi Network Connected” message will display on screen
{{ :fig_86_failed_vs_successful_wifi_connection.png?nolink&500 |Fig 86: Failed/Successful WiFi Connection}}\\

7. Check the WiFi icon on the Home Screen to verify if the WiFi network is properly connected.
{{ :fig_87_wifi_status.png?nolink&500 |Fig 87: WiFi Status}}\\

8. A new section **Current Connection** will show under **System → WiFi settings**.
{{ :fig_88_current_connection.png?nolink&250 |Fig 88 : Current Connection}}\\

9. Selecting **Scan**, users may choose to **Forget** the current connection and establish a new one.